Kindi Ethernet Encryptors

The Data is the most valuable, confidential and critical asset of todays world. It is highly essential to protect the data environment as well as the data-in-motion. Most of the transmitted data are sent exposed and unprotected over the network, which makes it easy for the unauthorized people to obtain the sensitive information.

The hardware encryption technologies are the most reliable methods used to ensure security and integrity in data in motion. High-tech encryptors are required to encrypt data of in the fastest way and to avoid performance problems such as latency and synchronization.

Kindi Ethernet Encryptors, encrypts data transferred between two or more points at the hardware level, on FPGA cards.

FPGA Based Encryption

There are many subsystems on the basis of our hardware encryptors. We have developed, tested and used all these subsystems in real time environments for more than 10 years.
One of these subsystems where encryption algorithms work, is the FPGA system. We produced and developed all of our chip-based encryption with our “Numerical designs” which makes our product 100% hardware. It is much safer, faster and more efficient than all software and CPU based technologies.

Moduler Design

Each system is in separate modules, so modules can be revised and maintained easily according to the needs of the customers.

The Hardware Power

Thanks to its hardware-based structure, Kindi does not affect the bandwidth of the network, unlike the equivalent technologies. It is independent of the Zero-Day vulnerabilities and the specific operation in-house features can be developed.

Different Infrastructures and Topologies

Metro, MPLS, RadyoLink; It can be used in Ethernet and IP layers. It is addressable thanks to its VLAN ID, MAC address and Ethertype based encryption options.

KindOS

Our encryptors is managed with KindOS which is our own Linux based system. Thanks to KindOS, all the integrated subsystems can operate on a more reliable infrastructure.

Server Cabinet, Desktop,
In-Vehicle

With the Plug-Play-Forget principle, different types of Kindi encryptors are applicable to use in different environments. The installation is easy and requires no maintenance.

Hardware-based and high-tech Kindi Ethernet Encryptors are produced in four sizes to meet the different needs of various environments.

Kindi Technology

FPGA (Chip) based hardware encryption

Does not affect network bandwidth, nor the other equipment on the network.

Encryption in AES 256bit,
14 round, and GCM mode.

<2µS total latency.

Encryption performance up to 40Gbps

No software vulnerabilities as Zero-Day etc.

Key Management

  • Dynamic key exchange
  • Key sharing over secure line
  • Asymmetric key sharing via the management portal
  • Dynamic key generation with TRNG
  • Key assignment through the key port with the external device
  • Automatic key management with the master device.

Management Features

The management of the Kindi products is done through KindOS, the user-friendly portal.

  • KindOS web portal
  • User management
  • Maintenance and repair management
  • Event and alarm tracking
  • Syslog and EventLog servers support
  • SNMP Remote monitoring support

Tamper Safety

Thanks to the sensors in the device, any physical intervention can be detected, and in case of unwanted interventions, the data is protected from the access and deletion.

  • Physical tamper detection
  • Active tamper sensors
  • Silent central alarm
  • Different tamper responses
  • Emergency reset button
  • Alarm port input / output